Interface • 1-Port 10/100/1000Base-T RJ45 with Auto-negotiation and Auto-MDI/MDI-X function • 1 Port 1000Base-SX SC interface, provide long distance up to 220/550m on IGT-902 • 1 Port 1000Base-LX SC interface, provides long distance for 10km on IGT-902S

Industrial Conformance
• 12V to 48V DC, redundant power 
• -10 to 60 Degree C operation temperature
• IP-30 metal case 
• Relay alarm for port breakdown
• Supports 6KV DC Ethernet ESD protection 
• Free fall, Shock and Vibration Stability 
• DIN-Rail and Wall-mountable hardware design

Layer 2 Features
• Store-and-Forward mechanism
• Prevents packet loss with back pressure (Half-Duplex) IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• Maximum frame size to 9216 Bytes
• Loop detection / Broadcast / Multicast / Unicast storm control
• Supports VLANs
 –IEEE 802.1Q Tagged based VLAN
 –Up to 16 VLANs groups, out of 4K VLAN IDs
 –Management VLAN

Quality of Service
• Ingress/Egress Bandwidth control on TP / Fiber port
• 4 priority queues, strict priority and Weighted Round Robin (WRR)
• Traffic classification by:
 –IEEE 802.1p Class of Service
 –IP DSCP priority
 –IP Address priority

Management
• Built-in IP-based Web interface for remote management
• SNMP v1 / v2c and 4 RMON groups, Event trap and SNMP trap support 
• Manual IP address setting / DHCP client for IP address assignment
• TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test 
• 16 TCP / UDP Filter groups 
• Password setting, IP setting and devices description setting through Planet Smart discovery utility 
• Firmware upgrade via remote Web interface
• Reset Button at the front panel for the factory default reset
• Display the current operating temperature 

Specifications:

Model	IGT-902 / IGT-902S
Hardware Specification
Copper Interface	1 x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
Optic Interface	IGT-902: SC IGT-902S: SC
Optical Mode	IGT-902: Multi-mode IGT-902S: Single mode
Optic Wavelength	IGT-902: 850nm IGT-902S: 1310nm
Launch Power(dBm)	MAX. IGT-902: -4 dBm IGT-902S: -3 dBm Min. IGT-902: -9.5 dBm IGT-902S: -9.5 dBm
Receive Sensitivity	IGT-902: -13.5 dBm IGT-902S: -14.4 dBm
Maximum Input power	IGT-902: -18 dBm IGT-902S: -20 dBm
Speed	Twisted-pair 10/20Mbps for Half / Full-Duplex 100/200Mbps for Half / Full Duplex 2000Mbps for Full-Duplex Fiber-optic 2000Mbps for Full-Duplex
Cable	Twisted-pair 10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m 100Base-TX: 2-pair UTP Cat. 5, up to 100 m 1000Base-T: 4-pair STP Cat 5,6 up to 100m Fiber-optic Cable • 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m. • 9/125μm single-mode cable, provides long distance for 　10/15/20/30/40/50/60/70/120km (very on fiber transceiver or SFP 　module)
LED indicator	• Power: P1, P2, Fault • TP: LNK/ACT, 1000 • Fiber: LNK/ACT
Power Input	DC 12V to 48V Redundant power with polarity reverse protection function
Power Consumption	7.9 Watts/ 27 BTU (maximum)
Operating Environment	Temperature: -10~60 Degree C Humidity: 5~90% non-condensing
Storage Environment	Temperature: -20~75 Degree C Humidity: 5~90% non-condensing
Dimension (W x D x H)	135 x 85 x 32 mm
Weight	423g
Installation	DIN rail kit and wall mount ear
Management and Layer 2 Features
Management Interface	WEB / SNMP v1, v2c
Port Configuration	Port disable/enable Auto-negotiation 10/100/1000Mbps Full and Half duplex mode selection. Flow Control disable / enable. Bandwidth control on each port.
VLAN	IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 16 VLAN groups Q-in-Q VLAN
QoS	Traffic classification based on : • 802.1p priority • IP DSCP field in IP Packet • IP Address
Bandwidth Control	Ingress / Egress bandwidth control • Rate range: 512kbps to 500Mbps Storm control • Broadcast / Multicast / Unknown Unicast packet
Standard Conformance
Emissions	FCC Class A, CE Class A
Standard	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX / 100BASE-FX IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ab 1000BASE-T IEEE 802.3x Flow Control and Back pressure IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.3ah OAM
Stability	IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration)

Industrial Networking

The IGT-902 series managed industrial Gigabit media converter, offers high reliability and security to ensure continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or the extremely low or high temperatures environments. In the industrial networking environment, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might affect the entire operation of industrial systems and thus cause incredible financial loss. By adopting the IGT-902 managed industrial Gigabit media converter which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation.

Fiber-Optic Networking for ISP, Enterprise, and Home 

With high performance of data transmission and easy installation, the IGT-902 series Industrial Managed Gigabit Ethernet Media Converter can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for small office network environment in the enterprises. The Web Management interface of the IGT-902 series enables network administrators to easily monitor and setup the converter, the transmission speed and duplex through web browsers.

Other Related Products