|
FEATURES OF 8 PORT POE INDUSTRIAL MANAGED SWITCH WITH 2 TP & SFP
PORTS
Physical Port
8-Port 10/100Mbps with IEEE 802.3af PoE RJ-45
2-Port Gigabit TP/SFP combo interface, SFP(Mini-GBIC) supports 100/1000 Dual Mode
1 RJ-45 Console interface for Switch basic management and setup
Industrial Conformance
48V DC, redundant power with polarity reverse protect function
-40 to 75 Degree C operating temperature
IP-30 metal case
Relay alarm for port breakdown, power failure
Supports 6000 VDC Ethernet ESD protection
FCC Class A, CE compatibility
Free fall, Shock and Vibration Stability
Power Over Ethernet
8 10/100Base-TX ports with IEEE 802.3af inject built-in
Supports 48VDC, 15.4 Watts PoE power output to 8 IEEE 802.3af compliant Powered Devices
Power feeding On/Off and priority configuration
Powered Device Auto Detection
LED PoE Status Monitoring
Rapid Ring
Rapid Ring, Dual Homing, Couple Ring Topology
Provides redundant backup feature and the recovery time less than 20ms
Layer 2 Features
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standards
Prevents packet loss with back pressure (Half-Duplex) IEEE 802.3x PAUSE frame flow control (Full-Duplex)
Supports VLANs
IEEE 802.1Q Tagged based VLAN
Port-Based VLAN
GVRP
Up to 9 VLANs groups, out of 4K VLAN IDs
Supports Link Aggregation
Up to 4 Trunk groups
Up to 4 ports per trunk group with 800Mbps bandwidth (Full Duplex mode)
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Cisco ether-Channel (Static Trunk)
Quality of Service
4 priority queues on all switch ports
Traffic classification by:
Port-Based priority
IEEE 802.1p Class of Service
IP TOS (Type of Service) priority
Supports strict priority and Weighted Round Robin (WRR) policies
Ingress/Egress Bandwidth control on each port
Management
Web-based, Telnet, Console Command Line management
Access through SNMP v1, v2c and v3 set and get requests
SNMP Trap / SMTP email for alarm notification of events
System Log Server / Client
Configuration backup / restore
E-mail event alert
TFTP firmware upgrade
Supports LLDP to allow switch to advise its identification and capability on the LAN
Model
|
ISW-1022MPT
|
| Hardware
Specification |
| Copper
Ports |
8 10/ 100Base-TX RJ-45 Auto-MDI /
MDI-X ports
2 10/100/1000Base-T RJ-45 port
|
| SFP
/ mini-GBIC Slots |
2 SFP interface, shared with Port-9
and Port-10 |
| Switch
Architecture |
Store-and-Forward |
| Switch
Fabric |
5.6Gbps / non-blocking |
| Switch
Throughput |
8.3Mpps |
| Address
Table |
8K entries |
| Share
Data Buffer |
1Mbit |
| Maximum
Frame Size |
1522 Bytes packet |
| Flow
Control |
Back pressure for half duplex, IEEE
802.3x Pause Frame for full duplex |
| LED |
Per unit: Power (Green), Power 1
(Green), Power 2 (Green), Fault (Red), Master (Green), FWD (Green)
8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
SFP port: LNK/ACT(Green), 1000T: LNK/ACT(Green), 1000M(Green)
|
| Console
Interface |
One RJ-45-to RS-232 male connector
for switch management |
| Power
Input |
48V DC, Redundant power with polarity
reverse protection function |
| Power
Consumption |
144 Watts |
| Dimension
(W x D x H) |
72mm x 105mm x 152mm |
| Weight |
993g |
| ESD
Protection |
6KV DC |
| EFT
Protection |
3KV DC |
| Power
Over Ethernet |
| PoE
Standard |
IEEE 802.3af PSE (Power Sourcing
Equipment) |
| Units
can be Powered |
8 |
| PoE
Power Output |
48V DC, Max. 15.4 Watts, 350mA |
| Power
Pin Assignment |
1/2(+), 3/6(-) |
| Layer
2 Function |
| Management
Interface |
Console, Telnet, Web Browser, SNMP v1,
v2c and v3 |
| Port
Configuration |
Port disable / enable
Auto-negotiation 10/100Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port
|
| VLAN |
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups
|
| Spanning
Tree |
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
|
| Link
Aggregation |
Supports 4 groups of 4-Port trunk
support |
| QoS |
Traffic classification based on :
Port Number,
802.1Q Tag,
802.1p priority,
I
P DSCP / TOS field in IP Packet |
| IGMP
Snooping |
v1 and v2, 256 multicast groups and
IGMP query |
| Bandwidth
Control |
Per port bandwidth control
Ingress:
100Kbps~102Mbps or 100Kbps ~ 256Mbps(Gigabit port)
Egress:
100Kbps~102Mbps or 100Kbps ~ 256Mbps(Gigabit port) |
| Port
Mirror |
RX / TX / Both |
| Security |
Supports 100 entries of MAC address
for static MAC and another 100 for MAC filter
Supports 10 IP addresses that have permission to access the switch
management and to prevent unauthorized intruder
|
| SNMP
MIBs |
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-1493 Bridge MIB
RFC-2674 Extended Bridge MIB (Q-Bridge)
Private MIB
|
| Standards
Conformance |
| Regulation
Compliance |
FCC Part 15 Class A, CE |
| Safety |
UL 331236 |
| Standards
Compliance |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit
SX/LX
IEEE 802.3x Flow
Control and Back pressure
IEEE 802.1D Spanning
tree protocol
IEEE 802.1w Rapid
spanning tree protocol
IEEE 802.1p Class
of service
IEEE 802.1Q VLAN
Tagging
IEEE 802.1x Port
Authentication Network Control
IEEE 802.3af Power
over Ethernet |
| Environment |
| Operating |
Temperature: -40 ~ 75 Degree C
Relative Humidity: 5% ~ 90%
|
| Storage |
Temperature: -40 ~ 85 Degree C
Relative Humidity: 5% ~ 95% (non-condensing)
|
|
|
PLANET Managed Industrial
Ethernet Switch, ISW-1022MT, offers high reliability and control cabinet
of transportation, factory floors, outdoor space, and where in extreme low
or high temperatures. In the industrial networking environment, each
networked device is required to keep running continuously in the hazardous
status. If the industrial equipment looses its connection to the network,
it might iaffect the entire operation of industrial systems and thus cause
incredible financial losses. By applying the ISW-1022MT Managed Industrial
Switch which complies with all the requirements of industrial
applications, customers would have the advantages of high reliability,
fast recovery capability, and safe Ethernet network operation.
|
